usa: sales: 800-490-2361 technical support: technicalsupport@pomonatest.com fax: 425-446-5844 europe: 31-(0) 40 2675 150 international: 425-446-5500 where to buy: www.pomonaelectronics.com all dimensions are in inches. toleranc es (except noted): .xx = .02? (,51 mm), .xxx = .005? (,127 mm). all specific ations are to the latest revisions. specifications are subjec t to change without notice. registered trademarks are the property of their respective companies. copyright ? 2010 d1093787 rev. 101 page 1 of 1 model 1825, 4897, 4899, 6545 standard banana plug, solderless and stackable features ? designed to fit on the end of any 22 awg to 18 awg wire. ? cross hole wire entry fits wires up to .12? (3mm) diameter. ? available with tarnish resistant nickel or gold plating for very low contact resistance. ? model 4899 is rated to temperatures up to +302f (+150c). ? set screw simplifies assembly of test leads and jumpers by using a flat blade screwdriver. ? fits standard panel and binding post banana jacks .161? to .166? (4,0mm to 4,2mm) diameter. materials banana jack: beryllium copper, gold plated banana plug: body ? brass, nickel plated (model 4897 is gold plated) spring ? beryllium copper, nickel plated (model 4897 gold plated) insulation: polypropylene (model 4899 is polyphenylene sulfide) set screw: steel, zinc plated, 8-32 single slot ratings voltage: for ce compliance and for personal safety, do not hold in hand when voltages exceed 33 vrms/70 vdc. maximum voltage for hands free use in controlled testing environments: 5000 vrms max. do not use on circuits where transient stresses can exceed the rated voltage. current: 15 amps maximum operating temperature: +122of (+50 oc) max. (model 4899: +302of (+150oc) max.) ordering information model: 1825- color nickel plated banana with polypropylene insulation color : 0=black, 1=brown, 2=red, 3=orange, 4=yellow, 5=green, 6=blue, 7=violet, 8=gray, 9=white, 02=set of black and red ordering example: 1825-5 (1825 with green polypropylene insulation) model: 4897-0 gold plated banana plug with polypropylene black insulation model: 4897-2 gold plated banana plug with polypropylene red insulation model: 4899-0 nickel plated banana with high temp erature black insulation (polyphenylene sulfide) model: 4899-6 nickel plated banana with high te mperature blue insulation (polyphenylene sulfide) model: 6545 package of ten 1325, one of each color. model: 4914 replacement set screws, package of 100.
|